Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮Australia Post Priority Dispatch📮Free Shipping Australia wide📮

Independent lab testing

Tested by NSF International. Result: Pass.

In 2019 we sent the InFlow™ Tap Filter cartridge to NSF International, the most recognised water-filter testing lab in the world. They screened it against NSF/ANSI 42, the drinking water filter standard. It passed. Here is exactly what they found.

NSF/ANSI 42-2018Job J-00331901Report dated 16 July 2019Result: PASS

See the results

View the full report (PDF)

What the lab checked

259 substances. One cartridge. Pass.

The test asks two questions. Does the cartridge do its job? And does it add anything of its own to your water? The lab ran water through the cartridge, then analysed what came out, down to parts per billion. Both answers came back the way we hoped.

259

substances screened

53

metals tested

100+

chemicals and solvents

PASS

NSF/ANSI 42-2018

The results

What came out the other side.

Every figure below is from the NSF report, not from us. "Non-detectable" means below the laboratory's detection limit for that substance.

Chlorine

0.48 mg/L in, non-detectable out

Chlorine is why tap water can smell like a pool. The cartridge took it from 0.48 mg/L to below the detection limit.

Chlorine by-products

5.2 µg/L in, non-detectable out

Trihalomethanes form when chlorine meets organic matter in the pipes. Total THMs went from 5.2 µg/L to non-detectable.

Lead

Non-detectable

Lead can leach from older pipework and fittings. None was detectable in the water that came through the cartridge.

Heavy metals

Non-detectable

Arsenic, mercury, cadmium, chromium, copper, nickel, uranium and more. Of the 53 metals screened, every metal of health concern came back non-detectable.

Sediment and particulates

Passed NSF/ANSI 42

Rust, grit and fine particles. The cartridge met the NSF/ANSI 42 requirement, and passed the pressure and integrity checks without leaking.

Minerals kept

TDS 52 mg/L in, 52 mg/L out

Total dissolved solids didn't change, so the calcium and magnesium stay in your water. It filters, it doesn't strip.

Results relate to the cartridge tested (model 45-10-150), the cartridge used in the InFlow™ Tap Filter and InFlow™ Beauty Filter. Testing performed by NSF International, Ann Arbor, Michigan, to NSF/ANSI 42-2018.

Want that in your glass?

Shop the Tap Filter

Page 6 of the report: metals in drinking water by ICP-MS. ND means non-detectable.

Every substance

Don't take our word for it. Read the report.

The report is NSF International's own document, job number J-00331901, 13 pages, every one carrying their reference. Here is what they screened for.

Metals (53)

Aluminium, antimony, arsenic, barium, beryllium, bismuth, cadmium, cerium, cesium, chromium, cobalt, copper, dysprosium, erbium, europium, gadolinium, gallium, germanium, hafnium, holmium, iridium, lanthanum, lead, lithium, lutetium, manganese, mercury, molybdenum, neodymium, nickel, niobium, palladium, platinum, praseodymium, rhenium, rhodium, rubidium, ruthenium, samarium, selenium, silver, strontium, tantalum, tellurium, thallium, tin, titanium, tungsten, uranium, vanadium, ytterbium, zinc, zirconium.

Volatile organic compounds (60+)

Including benzene, toluene, xylenes, styrene, chloroform, carbon tetrachloride, vinyl chloride, trichloroethylene, tetrachloroethylene, MTBE and total trihalomethanes. All non-detectable after the cartridge.

Semi-volatile compounds, phthalates and plastics chemicals (100+)

The EPA Method 625 scan: phenols, phthalates (the plasticisers), PAHs, nitrosamines, anilines and related compounds. This is the part of the test that checks the filter adds nothing of its own to your water. All non-detectable.

Solvents, glycols and acrylates (25+)

Acrylonitrile, acetates, acrylates, epichlorohydrin, ethylene and diethylene glycol, phthalic acids, vinyl acetate and more. All non-detectable.

Radioactivity and water chemistry

Gross alpha and beta radioactivity (EPA 900.0), free chlorine, total dissolved solids, pH and temperature.

Download the NSF report (PDF, 13 pages)

What this test doesn't cover

We'd rather you knew exactly what was tested.

NSF/ANSI 42 is the standard for chlorine, taste, odour and particulates. Three things it doesn't measure, and what that means for you.

Fluoride

Not part of this test, and the Tap Filter cartridge isn't designed to target it. If fluoride matters to you, that's what the InFlow™ Stainless Steel Pro is for: a different cartridge with fluoride-reduction media.

PFAS (forever chemicals)

Not part of this standard. Activated carbon is shown to reduce PFAS, but we won't put a number on it.

Viruses

This is a chemical test, not a microbiological one. InFlow filters are made for treated town water. They are not a way to make unsafe water safe.

What it means at your sink

Lab results are nice. Here's what you'll notice.

Tastes like water should

No chlorine smell, no chemical aftertaste. Coffee, tea and cooking taste cleaner from the first glass.

Reduces what you can't see

Chlorine, lead, heavy metals, sediment and microplastics, through multi-stage activated carbon filtration.

Keeps the good stuff

Calcium and magnesium stay in. In the lab, total dissolved solids were the same before and after.

Same pressure, no plumber

Clips onto your tap in 3 minutes. Fits 95% of Australian taps, with 12 adapters in the box.

Proof you can see

The lab can't show you this. Your cartridge can.

This is a real cartridge after a few months in an Australian kitchen. The colour is what it caught: chlorine by-products, rust, sediment and metals that didn't make it to your glass.

New cartridge (left) and a used one (right).

How the colour builds: new, about 1 month, about 3 months, about 6 months.

When it turns, swap it

The cartridge changing colour is your sign to replace it, every 3 to 6 months depending on your water. Refills work out at about 20c a day.

See refill cartridges

20,000+ Aussie customers

What people say after the first glass.

Real reviews, word for word, from verified buyers of the Tap Filter.

★★★★★

"I was bought up on tank water in nz and this reminds me of it tastes of nothing which is awesome. I always had to add lemon to my tap water because of the metal taste but not anymore. No metal tasting water"

Sim · Verified buyer · Tap Filter

★★★★★

"I always knew our tap water wasn't the best and had my doubts, but didn't realise how bad it was until I put a cup of the filtered water and normal tap water next to each other I was gobsmacked."

Ali · Verified buyer · Tap Filter

★★★★★

"Was really sceptical before the inflow filter arrived. Thought it might be just another waste of hard earned money going down the drain. I'm really glad I have it now. The difference in the taste of the water is amazing. (Our town has notoriously bad water)."

Heather · Verified buyer · Tap Filter

4,000+ five-star reviews across the InFlow™ range.

Join 20,000+ Aussie customers.

Shop now

Which filters this covers

One cartridge, two filters. And the Pro.

The NSF report covers the cartridge shared by the Tap Filter and the Beauty Filter. The Stainless Steel Pro uses a different cartridge, independently lab tested, built for fluoride.

InFlow™ Tap Filter

NSF/ANSI 42 tested

The cartridge in this report. For the kitchen tap: drinking, cooking, coffee and tea.

Shop the Tap Filter

InFlow™ Beauty Filter

NSF/ANSI 42 tested

The same tested cartridge, built for the bathroom basin. For face washing and skincare.

Shop the Beauty Filter

InFlow™ Stainless Steel Pro

Independently lab tested

A different cartridge with fluoride-reduction media, in a 304 stainless steel body. For fluoride, chlorine and heavy metals.

Shop the Stainless Steel Pro

Tested in the lab. Proven at the sink.

Try it for 90 days. If the water doesn't taste different, send it back for a full refund.

90-day money-back guaranteeInstalls in 3 minutesFree shipping from Sydney100% Australian-owned

Shop the Tap Filter

Which filter is right for me?

Questions

The things people ask about the testing.

What is NSF/ANSI 42?

It's the drinking water filter standard for aesthetic effects: chlorine, taste, odour and particulates. NSF International developed it, tests to it, and it's the most recognised water filter standard in the world.

Is InFlow NSF certified?

The cartridge was tested by NSF International to NSF/ANSI 42 and passed. The full report is linked on this page so you can read the results yourself.

Does the Tap Filter remove fluoride?

No. The Tap Filter cartridge is activated carbon and isn't designed to target fluoride. If fluoride reduction matters to you, the InFlow™ Stainless Steel Pro uses a different cartridge with fluoride-reduction media.

What about PFAS?

PFAS weren't part of this test. Activated carbon is shown to reduce PFAS, but we won't claim a figure.

Which InFlow products does this report cover?

The InFlow™ Tap Filter and InFlow™ Beauty Filter, which share the tested cartridge. Our other filters use their own cartridges and are independently lab tested.

How often do I replace the cartridge?

Every 3 to 6 months depending on your water and how much you use. The cartridge changes colour as it fills, which is your sign to swap it. Refills are on the refills page.

Where can I read the full report?

Right here (PDF, 13 pages). It's NSF International's own document, job J-00331901.