Setup Guide
Instruction Manuals:
Need Help?
Prior to Tap Filter Installation
1️⃣
Ensure your tap thread diameter is between 16mm and 23.5mm.
Compatible Sizes: 16, 18, 19, 20, 21, 22, and 24mm.
2️⃣
Confirm if your tap has a Removable Aerator
3️⃣
Confirm if your tap has an internal or external thread. Select the appropriate adapter from the box
4️⃣
Check the water pressure. The filter works best within 0.1MPa–0.4MPa
5️⃣
Place the thickest seal ring in between the two halves of the InFlow Tap Filter System
6️⃣
Run water through the tap for a few seconds to flush out any debris before installing
Prior to Tap Filter Installation
1️⃣ Ensure your tap thread diameter is between 16mm and 23.5mm.
Compatible Sizes: 16, 18, 19, 20, 21, 22, and 24mm.
2️⃣ Confirm if your tap has a Removable Aerator
3️⃣ Confirm if your tap has an internal or external thread. Select the appropriate adapter from the box
4️⃣ Check the water pressure. The filter works best within 0.1MPa–0.4MPa
5️⃣ Place the thickest seal ring in between the two halves of the InFlow Tap Filter System
6️⃣ Run water through the tap for a few seconds to flush out any debris before installing
InFlow Tap Filter
(gooseneck faucets)
InFlow Tap Filter
(standard mixer faucets)
InFlow Shower Filter
Universal Adapter Installation Guide
Adapter Sizing Guide
Not Sure What Type of Tap You Have?
If the threads are on the outside, use a female adapter.
If the threads are inside the tap, use a male adapter.
If your tap has no thread at all, try the M22 Universal Clamp-On – slide it over the spout and tighten the metal clamp.
Share and get 15% off!
Simply share this product on one of the following social networks and you will unlock 15% off!